Winton WSB Series, Руководство пользователя

Страница: 18 / 40

v3
16
Winton WSB
SERVICING & MAINTENANCE (continued)
Safety: Store all lubricants away from excessive heat, dust, moisture and contaminants.
Safety: Ensure tractor and machine is stopped & keys out of ignition before set - up/maintenance.
Other Maintenance
Blades: Check condition of the blades and replace if worn/broken. Always take care when handling
blades, wear gloves and use suitable tools for changing blades. Always check blade bolts are secured
and blades are adjusted correctly.
Chain Casing: (Every 150 working hours, or once a year whichever occurs first)
Remove the chain guard, clean the chain and sprockets and put the chain guard back into position.
Make sure the chain guard gasket/seal is not damaged from removal, if it does need replacing clean
the metal on the body and guard, then replace with a new gasket.
PTO Shaft: Check the condition of your PTO shaft and replace if worn or damaged immediately.
Cleaning: Ensure the machine is cleaned of debris. Remove debris is from any moving parts to
prevent entanglement. After use, with the PTO shaft detached, turn the shaft by hand to make sure
there no obstructions.
Bearings: Check the bearings. If the oil seals are damaged debris may enter the bearings. Clean and
replace with new bearings if necessary. Run without a load for 3 - 5 minutes to check bearings are
operating smoothly.
Paintwork: Re - coat any damaged paintwork to prevent corrosion.
Storage: Store the machine in a dry, level area and ensure it is stable and unable to move or
overturn. Remove dirt from blades and the roller.
Safety Guards: Prior to each use check the condition of the guards. Replace if damaged or worn.
*The periods recommended are based on normal operating conditions. Severe or unusual conditions
may require more frequent maintenance.