Winton WPH Series, Руководство пользователя

Страница: 4 / 24

4
Attachment Pre-use Checks
Upon receipt of attachment, and again within the first 4 hours of use:
1. Check/tighten all bolts, nuts and screws (and those securing blades).
2. Check the tension of any belt(s), and adjust if required.
3. Apply grease to grease points if necessary.
Tractor & Attachment Installation Checks
1. Before installing the PTO shaft, both tractor and attachment should be
stationary, with the ignition key removed.
2. Check engine oil level, top-up if required but do not overfill.
3. Check attachment is securely attached to tractor with secure pins on
linkage mounting pins. Attach chain of PTO shaft, to a secure point on
the tractor.
4. Check tractor PTO turns freely, and the attachment’s PTO drive shaft
can extend easily. Apply grease to PTO drive shaft.
5. Add extra weights to front of tractor (or wheel weights) if required.
6. Ensure all safety guards/doors/covers are securely in place.
7. Keep spectators at a safe distance before operating machinery.
Post-use Regular Checks
Caution: Components can be hot after operation. Allow attachment to
cool before performing checks. Pay attention to any sharp/pointed
parts, and use suitable tools when servicing.
1. Regularly check/tighten all bolts, nuts and screws (and those securing
blades). Regularly check condition of blades, belts, wearing parts, PTO
shaft and safety guards. Immediately repair/replace any damaged or
worn parts.
2. Regularly clean the attachment, check for/clear any entangled material
around any moving parts. With the PTO shaft detached, turn the shaft
by hand to ensure there are no obstructions.
3. Regularly check/clean rotor and roller bearings, apply grease if required.
Replace bearings if oil seals are damaged.
Safety Information (Continued)