Specific pairing procedures may vary with different mobile phone. Please refer to your
mobile phone
manual for further information. Steps as follows:
•
Please keep the headset and mobile phone in the range of 1 meter when pairing.
•
Make the headset enter into pairing mode (LED is red and blue blink)
•
Start the Bluetooth function of mobile phone and search the Bluetooth devices.
After searched, select “BH-02”in the Bluetooth device list.
•
According to indication, enter password or PIN No:”0000”, and press the key of” Yes”
or “confirmed”.
( it depends on the Bluetooth device setting )
•
After successful pairing, select “BH-02" in the Bluetooth device list, and press
“connect”.
•
After successful connecting, the blue LED of the headset will keep blink.
Notes:
•
If the pairing is not successful, please switch off headset firstly, and then re-pair
again.
•
After pairing is successful, paired devices will remember each other. Unless pairing
information is deleted because of new pairing, no need to pair when use next time. If
you want to pair the headset with other devices, please pair it with the new device
according to steps 1
～
6 mentioned above.
•
Although WIN7 is a superior operating system with most drivers already built-in, in
some cases this does not cover the various hardware configurations built into the
device (eg. PC,Notebook, Netbook etc) from the manufacturer. In this case, please
visit the manufacturer’s web site for the latest Bluetooth drivers for your onboard
Bluetooth device.
3) Re-connecting to a Bluetooth device
•
Automatic connecting
Every time the headset is switched on, it will connect to last connected device
automatically .of course the source device Bluetooth is on “on” states
•
Manual connecting to last connected HFP device
When the headset is in standby mode and doesn’t connect to any HFP devices, short
press
MFB
button twice, it will connect to last connected source device automatically.
