TDS510USB Plus Emulator Installation Guide
Installing the TDS510USB Software
This installation assumes that the Code Composer Studio IDE has already
been installed on the PC. If not, please follow the directions for installing
Code Composer Studio first. After completing the installation procedure,
you may return to this guide to complete the installation procedure of the
TDS510 Emulator.
Insert the TDS510USB driver disk into your CDROM, Double click on
TDS510USB_PlUS_Setup(CCS3.3).exe
to install the JTAG emulator tools
for CCS3.3.
8
NOTE
Be sure the Code Composer Studio has been installed
before run Setup_510USB_Plus.exe. It’ll copy files to the CCS
install directory and create environment variable to enable
the file usage by CCS. If this step is missing, the
TDS510USB2.0 can’t function properly.
Before Software Configuration
You can choose tds510usb.cfg for a majority types of target DSP
system. Moreover, target DSP system listed below can use the other
advanced configuration file, which will help to download data to target
system more quickly.
Target DSP system Advanced Configuration File
C27xx tds510adv.cfg
C28xx tds510adv.cfg
C55xx tds510adv.cfg
C64xx tds510adv.cfg
C621x tds510adv_46b.cfg
C671x tds510adv_46b.cfg
Also, you can use the advanced configuration file by another way:
Open the Import Configuration Window by click ‘Import a Configuration
File’ and choose corresponding configuration whose first word is
‘Advanced’.
