Wintec MINI46, Руководство пользователя

Страница: 10 / 13

15 16
9�
Scrambler:
Scrambler (Factory setting is OFF)
The radio sets 9 codes of scrambler to measure a radio signal
securely� It can only be understand by someone who has special
group at the same code� It can’t transmission and receiving without
scrambler code�
There are 9 codes of scrambler from code 1 to code 9, as below:
10�
Compandor:
Compandor (Factory setting is OFF)
The radio supports Compandor function� To turn on compandor
are used in radio communication and in some noise reduction
schemes�
Please turn off this function if a radio doesn’t support this function�
Turn on Compandor, LCD screen shows 【 】 as below:
11�
APO:
APO (factory setting is OFF)
Choose 03/10/30/60 min� depending on your need� While 03 is
selected, the radio automatically turns power off if none of the
key is operated�
LCD screen shows
【
APO
】
as bellows�
6�
Mic Gain: Mic� Gain (Factory setting is Low)
Adjust Mic� Gain to transmit a clear volume�
7�
Save Mode: Power Saving Mode (Factory setting is 1:1)
Turn on power saving mode could extend radio using time,
LCD screen shows “Save” words as below:
Power save mode can be selected 1:1 – 1:4 and off� If
power save mode is 1:4 then saving power is excellent�
8�
SQL:
SQL Fine ADJ (factory setting is L3)
SQL FINE adjustment, value from L0 (SQL OFF) to L9 as below:
Too low volume might miss users’ attention�
SQL factory setting is L3
SQL Min L0 & SQL Max L9
Contents Guide Contents Guide