Wintec LP-4011+, Руководство пользователя

Страница: 8 / 19

4
- When scanning, long press [CH] to quickly switch to SOS
channel will stop scanning and jump to SOS channel (Need
to setting SOS channel).
CTCSS / DCS setting
1. Press [P1] to select the CTCSS / DCS Sub-Tone code.
2. When the SUB-Tone code is turned on, you can directly
press [
▲ ] or [ ▼ ] to select the SUB-Tone code. After
selecting OK, press [P1] or [PTT] or [P2] to jump out of the
SUB-Tone code setting mode, And select the use of the
SUB-Tone code or turn off the SUB-Tone code.
*The SUB-Tone code for transmitting and receiving is the
same.
LCD back light ON / OFF
Temporarily press [
○
] (Monitor / Back light key) to turn back
light ON. Temporarily press [
○
] again to turn back light OFF
or it will automatically turn OFF after 5 sec. lighting.
Monitoring
Hold on [
○
] for about 1 sec. Static is heard if the channel is
clear or any voice on this channel can be heard regardless
of CTCSS or DCS setting. LED glows green.
Monitor is used for following purposes
- To receive weak signal due to distance or for signal
intermittently received.
- To receive all signals on same channel even with different
CTCSS / DCS setting.
Keypad lock/unlock
Hold on [P2] for about 3 sec until shows on the screen to
confirm keypad lock is enabled. To unlock keypad, hold on
[P2] again for about 3 sec until clear from the screen.
*When keypad lock is enabled, volume control and program
features are locked to prevent accidental function changes.