38
FUNCTIoN MeNU SeTUP
Time-out-Timer
The purpose of Time-out-timer is to restrict transceiver for continuous long-term transmission. When the continuous transmission
time is beyond the due time, transceiver is forced to stop transmitting and make a sound of beeping.
After pressing
1.
key ,the LCD display
and then press
key to enter into function menu;
Turn band switch or Press
2.
/
key to choose NO.20 function item .It shows “
ToT
” on LCD;
Press
3.
key to enter into function menu setup,the current setup value show on LCD;
Turn band switch or press
4.
/
key to choose the desired setup;
oFF:
Time-out-Timer is disabled
60S:
The setup ime of Time-out-Timer is 60 seconds
120S:
The setup ime of Time-out-Timer is 120 seconds
180S:
The setup ime of Time-out-Timer is 180 seconds
Press
5.
key to come back into function menu setup,press
[PTT]
/
key to confirm and exit the function menu setup.
offset Frequency Setup
This function works through repeater. Namely, repeater receives accessing signal by one kind of frequency and then transmits in
the other kind of frequency. The offset between these two frequencies is called offset frequency.
After pressing
1.
key ,the LCD display
and then press
key to enter into function menu;
Turn band switch or Press
2.
/
key to choose NO.21 function item .It shows “
oFFSeT
” on LCD;
Press
3.
key to enter into function menu setup,the current setup value show on LCD;
