8
9
the number of present frequency. Release
button about 2 sec., LCD display will return to MEM
mode automatically.
7. CTCSS Code ON/OFF
1. Hold on for about 2 sec, to enable CTCSS .
Hold on again for about 2 sec to disable.
2. While CTCSS is enabled, the icon will blink and
press temporarily / repeatedly to select
CTCSS.
3. Press short once, CTCSS code can be change
by / button.
4. Press or or to leave the CTCSS setting.
8. LCD back light ON/OFF
Temporarily press to turn backlight ON.
Temporarily press again to turn backlight OFF or
it will automatically turn OFF after 5 sec lighting.
9. Monitoring
Hold on for about 1 sec to open the speaker. In
the meantime, If any user is using under the same
frequency even with different CTCSS, the voice will
still be heard. (LED glows green).
※
Monitor is used for following purposes.
1. To receive weak signal for long to distance or for
intermittentl signal.
2. To receive all signals on same channel even with
different CTCSS for monitoring.
10.Keypad lock /unlock
1. Hold on for about 3 sec till shows on the
screen to confirm keypad is locked.
2. To unlock keypad ,hold on again for about 3
sec till disappear from the screen.
※
When keypad lock is enabled, volume control and
program features are locked to prevent accidental
function changes.
11.Function settings
Temporarily press to enable menu mode. Use
/ to scroll manu item between 1 and 9.
1. Tone call selection: Under menu item 1, tone call
1 ~ 7 can be selected. Factory default is at b1.
2.Power save mode selection. Under manu item 2
, power save modes 1:1 ~ 1:4 can be selected.
Choose 1:4 if talk time is short for best power
saving.Factory default is OFF.
3.VOX on/off selection: Under manu item 3, VOX
on/off can be selected. Factory default is OFF.
VOX ON/OFF.
(ON)
(OFF)
