Wintal PDVD20HD, Руководство пользователя

Страница: 17 / 24

14
Video Out
Selecting the Video Output setting to switch between diff erent video outputs
Component: Set the video output to interlacing component output.
P-Scan: Set the video output to progressive component output
HD: Set the video output to high defi nition output (HDMI)
Note 1:
When the player is connected to a TV set that displays a progressive scanning picture •
YPbPr, select PSCAN
When it is connected to a common TV set, select Component.
•
If TV screen has no output after selecting P-SCAN, you can press V-MODE button to switch •
the state, it will then output normally
If you select HDMI connection, you should set up the play mode as HD state, then it will
•
output normally.
Note2:
Set video output type to “Component” or “P-Scan”
HD resolution menu should be disabled. •
HDMI should stop working •
HD JPEG mode menu should be disabled. •
Note3:
Set video output type to HD.
HD resolution menu should be enabled and set to’ Auto” responding to this action. •
“ • HDMI ” key is valid to switch HD resolution only in this case.
HDMI module can work only at this case. •
No CVBS at HD resolution. •
No OSD and sub-picture at HD-JPEG mode. •
Brightness
Press the LEFT and the RIGHT direction button to adjust the player video output brightness.
Sharpness
Press the LEFT and the RIGHT direction button to adjust the player video output sharpness.
Smart Picture
To select diff erent image brightness output mode
HD Resolution
Used to set the resolution of HDMI image output.
In this option, you can select diff erent HDMI image resolution.
Note:
IfTV screen has no output after selecting HD Resolution, you can press SETUP once then press
V-MODE button or restart the player and press V-MODE button to switch the state, it will
output normally