25
6.10 Loop Mode
To change the play mode press the ‘REPEAT’ button on the remote to change
between four modes:
No repeat: This would play the folder of music once
Repeat once: This would loop one song
Repeat all: This would play all song chronologically and loops.
Shuffle: Shuffle the play order of the songs and loops
6.11 Photo
Playing image files using the media player is very simple and supports a variety of
image formats.
Using the media player’s remote control, navigate to “Photo” and press
to select it. This will activate the picture filter and take you to the device list.
Once in the device list, use the navigation buttons to select the device type the media
is located in. Depending on the size of the hard drive and the number of files it
contains, it may take a few moments to detect. e.g. if you want to view pictures that
are stored on an attached USB hard drive, select USB Disk.
When the device type has been selected, use the navigation buttons on the remote
control to select the partition for the media player to access.
After you have located the image file you wish to view, highlight it. You will notice that
a small preview of the image file in place of the picture icon.
To view the highlighted image in full screen, press
on the remote control.
Please note that it may take a moment to display an image depending on its size.
6.12 Slide timing
The time slot setting allows you to select the time duration before the player displays
the next image in a slide show.