WinSystems PPC65BP-1 Series, Руководство по эксплуатации продукта

Страница: 33 / 63

PPC65BP-1x/Configuration
v1.0 www.winsystems.com Page 33
8.3.9 USB Port 3 Connector (J22, 1 x 4 Pin Wafer/2mm)
Layout and Pin Reference
8.3.10 CMOS Setup (JP1)
Layout and Pin Reference
8.3.11 LCD Panel Inverter ON/OFF Signal Setup (JP2)
The following table contains descriptions of the signal setup for different
jumpers installed.
Layout and Pin Reference
Pin Description
1 + 5 V
2 USB_D3-
3
4 GND
1
Jumper Description
1-2 Normal (Keep CMOS setup, default)
2-3 Clear CMOS setup
1
Jumper Description
1-3 2-4 +5 V high active (default)
1-3 4-6 +12 V high active
2-4 3-5 +5 V low active
3-5 4-6 +12 V low active
1 2
3 4
5 6