WinSystems PPC65BP-1 Series, Руководство по эксплуатации продукта

Страница: 28 / 63

PPC65BP-1x/Configuration
v1.0 www.winsystems.com Page 28
Jumpers
The following table provides jumper descriptions and references for the
main board components, illustrated above.
Switches
The following table provides switch descriptions and references for the
main board components, illustrated above.
8.2 Power
The main power supply to the board is +12 to +24 V DC. The PPC65BP-1x
draws power through the J16 connector. See “Power Input Connector
(J16)” on page 30.
8.3 Connectors
8.3.1 DDR3 SO-DIMM Socket (J3)
The PPC65BP-1x supports DDR3 DSRAM system memory, 1066 MHz or
1333 MHz, through this on-board SODIMM socket (204-pin).
Table 7: Jumpers
Item Description Reference
JP1
Clear CMOS
page 33
JP2
Backlight voltage setup
page 33
JP3
LCD panel voltage setup
page 34
JP4
LCD panel type setup
page 34
JP7
GPIO voltage selection
page 34
JP8
Audio out connector (from amplifier)
page 35
JP9
LPC debug port
page 35
JP10
COM port RI and power source adjust pin
page 36
JP11
COM port RI and power source adjust pin
page 36
JP12
COM port RI and power source adjust pin
page 36
JP13
COM port RI and power source adjust pin
page 37
Table 8: Switches
Item Description Reference
SW1
LCD resolution setup
page 37
SW2
AT/ATX and BIOS recovery setup
page 38