WinSystems EBC-Z5 SERIES, Руководство по эксплуатации продукта

Страница: 35 / 83

110113 PRODUCT MANUAL EBC-Z5xx 35
ETHERNET
PC82573L Gigabit Ethernet Controllers
The EBC-Z5xx is equipped with two Intel PC8573L Gigabit Ethernet controllers. Each of these provides a standard
IEEE 80.3 Ethernet interface for 1000/100/10BASE-T networks. The RJ-45 connections for each Ethernet port are
available at
J7 (Port 1) and J8 (Port ).
On-board Ethernet activity LEDs D1-D3 are provided for Port 1. LEDs D6-D8 are associated with Port . These activity
signals are also available off-board for enclosures or other applications that have remote mounting requirements. The
activity signals for Port 1 are provided at connector
J1 . The signals for Port are provided at J14 . See tables below for
signal and pin definitions.
J7, J8 - Gigabit Ethernet
Visual
Index
PCB Connector: TYCO 5556416-1 (J7, J8)
J1
(Ethernet Port 1)
Pin LED Color Signal
1 D1 GREEN ACTIVITY
2 - - +3VSB
3 D2 RED SPEED100
4 - - +3VSB
5 D3 RED SPEED1000
6 - - +3VSB
J14
(Ethernet Port 2)
Pin LED Color Signal
1 D6 GREEN ACTIVITY_A
2 - - +3V
3 D7 RED SPEED100_A
4 - - +3V
5 D8 RED SPEED1000_A
6 - - +3V
J12 - Ethernet Configuration
Ethernet Port 1
Non-Volatile Memory Protection
(Install Jumper to Disable Protection)
1-
Auxiliary Power Present
(Remove Jumper when powered in ATX Mode -
Default Installed)
3-4
Ethernet Port
Non-Volatile Memory Protection
(Install Jumper to Disable Protection)
5-6
Ethernet Port Present
(If Ethernet Port is not installed, remove jumper)
7-8
J12
1 3 5 7
2 4 6 8
□ □ □ □
□ □ □ □