Page: 3
Instruction, Use & Care Manual
Please save this manual for future reference.
Product Name:
Butterfly-Style Solar Wall or Step Motion Sensor Light
SKU #:
WHSL454
Installation Tips
Carefully remove the Solar Wall Light and all the fittings out of the box.
Find a suitable location for your solar wall light. It can be mounted on an EXTERIOR WALL, STAIR TREAD,
MASONRY, OR WOOD POST.
Note: For installation on masonry, start by drilling holes for the plugs and the attachment screws. Insert
the plug (included), and make sure it is flush with the surface. The bottom screw must protrude from the
surface by at least 5mm (0.2in.) in order to attach the light.
Use the template provided to measure the hole position correctly, and drill two holes of 6mm (0.24in.)
diameter.
Insert expansion plug into each hole.
Fix a screw to the lower expansion plug, and insert into the notch on the bottom of the light.
Straighten the lamp, and fasten the upper screw.
