Page: 7
Instruction, Use & Care Manual
Please save this manual for future reference.
Product Name:
LED Solar Motion Sensor Flood Light
SKU #:
WHSL445
Lamp head is adjustable as show below, but do not over rotate:
Replacing the Batteries
For best results, batteries should be replaced every 12 months.
Detach the housing from the lamp body by pushing it downward.
Take off the four screws with a screwdriver, and replace the old batteries. Make sure the new batteries are
rechargeable batteries.
Install the new batteries in the battery compartment, ensuring the correct polarity is observed.
Reassemble the unit by reversing the above procedure.
Maintenance
To keep your solar motion sensor light looking new, keep the lens free of dust and deposits by wiping occasionally with a
dry cloth or with warm soapy water if necessary.
Most important, ensure that the solar panel is kept free of dirt and debris at all times. A dirty solar panel will not allow the
batteries to fully charge, and this will shorten the life of the batteries and may cause the light to not function properly.
Technical Specifications
LED Light Setting:
100-120 Lumen (High)
5 Lumen (Low)
Rechargeable Battery Type:
soft package
1500mAh 3.6v NI-MH
Solar Panel:
Amorphous silicon
High Light activation (range):
30 seconds
Charge Time (minimum):
6 Hours
Motion Sensor Range:
5 – 8 meters (16.4 – 26.25 feet); 180 degrees Horizontal
