background image

Instructions

7

EN

For this appliance

•  Do not obstruct ventilation 

openings and heat dispersal slots.

•  Do not insert pointed metal 

objects (cutlery or utensils) into 
the slots in the appliance.

• Do not use the appliance to heat 

rooms for any reason.

1.2 

Identification plate

•  The identification plate bears the 

technical data, serial number and 
brand name of the appliance. Do 
not remove the identification plate 
for any reason.

1.3 Manufacturer liability

The manufacturer declines all liability 
for damage to persons or property 
caused by:
•  use of the appliance other than 

the one envisaged;

•  non-observance of the user 

manual provisions;

•  tampering with any part of the 

appliance;

•  use of non-original spare parts.

1.4 Appliance purpose

•  This appliance is intended for 

cooking food in the home 
environment. Every other use is 
considered improper.

•  The appliance is not designed to 

operate with external timers or with 
remote-control systems.

1.5 Disposal

This appliance must be 
disposed of separately from 
other waste (Directives 

2002/95/EC, 2002/96/EC, 
2003/108/EC). The appliance 
does not contain substances in 
quantities sufficient to be considered 
hazardous to health and the 
environment, in accordance with 
current European directives.
To dispose of the appliance:
•  Cut the power supply cable and 

remove it along with the plug.

Power voltage 

Danger of electrocution

•  Disconnect the main power 

supply.

•  Disconnect the power cable from 

the electrical system.

Содержание PV375CNAU





























Отзывы: