OFS-16031-TDGWC
T2-VT100--G,T2-SF100C--C,T2-AP100C--G
COFFEE TABLE WITH 2 DRAWERS
Reminders :
Two people are needed for assembly.
Use only hardware supplied.
Do not over tighten bolts.
This item may require periodic tightening.
MADE IN MALAYSIA
Page 2 of 2
HARDWARE PART :
Wrench
Flat Washer
Lock Washer
1 pc
8 pcs
4 pcs
Hex Bolt
8 pcs
8 pcs
Pan Head Screw
ASSEMBLY :
STEP 1
Pull out the Drawer Box as shown and Turn the Table Top upside down on a protective surface such as carpet or other soft material.
Use
Flat Washer
,
Lock Washer
,
Hex Bolt
and
Wrench
, to attach three legs randomly to the table top, do not fully tighten yet.
STEP 2
Insert the Fixed Shelf to three legs, insert the last leg to the corner of apron frame and Fixed Shelf.Then tighten with
Flat Washer
,
Lock Washer
and
Hex Bolt
using the
Wrench
provided.And fix the Fixed Shelf by insert and tighten the
Pan Head Screw using the screw-driver (Not provided).
STEP 3
Check its balance and tighten all bolts to complete the assembly.
Lock Washer
Hex Bolt
Wrench
Flat Washer
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
IMPORTANT NOTE :
~ Please keep all hardware out of the reach of
children.
