ball bearing retainer
14
13
Chart 6
Step 13. Insert the two Grommets on top of the Main Desk.
Step 14.
Install the Center Drawer (L) in place.
Important:
(Be sure to move the ball bearing retainer all the way to the front of the glide
and carefully slide the rails into the glides and ball bearing retainer.)
Assembly is now complete
Chart 5
Step 10. Connect
LHS Glide Panel
(D) and
RHS Glide Panel
(E) to
R1 Desk top
(B) by slightly
tightening
1-1/4" Machine Bolt
(6PCS) install the
Keyboard Pullout
(C) in place, fasten
the previously installed
1-1/4" machine Bolts
(6PCS), insert
1-1/4" Flat Head Wood
Screws
(6PCS) to reinforce the assembly.
Step 11.
Connect
L-Shaped LHS panel
(H)
to
R1 Desk Top
(B) and use
1-1/4" machine bolts
(3PCS)
and
1-1/4" flat head wood screw
(2PCS) to reinforce the assembly.
Step 12. Insert
short (3/4") flat head wood screws
(14 PCS) through metal figure 8 to connect
R1
Desk Top
(B) to Main Desk base and
R2 Desk Top
(I) to Return Desk base.
X6
B
12
X14
I
12
10
10
X6
E
D
12
L
11
X3
X2
11
11
H
D
E
D
E
B
B
ball bearing retainer
10
C
