3-5
SECTION 3 -
DRIVING YOUR MOTORHOME
MIRRORS – POWER ELECTRIC
–
If Equipped
Always adjust mirrors for maximum rear
visibility before driving off. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
Mirror Adjustment Control
The mirror control is located on the driver side
armrest panel or the dash. The ignition key must
be on to adjust the mirrors.
Mirror Heaters
The mirrors may also contain heating
elements to de-fog or de-ice the mirror glass
during cold weather operation. A switch for the
mirror heaters is located on the dash. To turn on,
press the switch UP. Press DOWN to turn off.
Mirror Arm/Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by rotating the mirror head.
NOTE: Set screws may be located on the
opposite side of the mirror arm.
Passenger side mirror is similar.
BRAKE-SHIFT INTERLOCK
Ford
®
Chassis
The Brake-Shift Interlock is a safety feature
that prevents the shift lever from being moved
from the Park position unless the ignition is ON
and the service brake pedal is pressed.
NOTE: If the brake light fuse is blown, the
interlock feature will not work properly
and an alternate method must be used.
See the chassis manual provided in your
InfoCase for detailed instructions on
what to do in this situation.
Move Selector Switch L or R to select mirror.
Center “neutral” position disables arrows
to avoid unintentionally moving a mirror.
Press Arrow Buttons to move
mirror surface in direction indicated.
Mirror Heat Switch
(Located on dash)
-Typical View
Mirror Head Pivot Lock
• Loosen Allen head set
screws to pivot mirror head.
• Torque 75-100 in./lbs.