3-13
SECTION 3 –
DRIVING YOUR MOTOR HOME
To close the hood, pull downward and swing
inward. Press top edge of hood panel inward
firmly with palms of your hands to ensure proper
latching.
ENGINE ACCESS – INTERIOR
Front Engine Cover
•
To remove the engine cover,
insert the
supplied hex wrench into the hole in the top
center or the front edge of the engine cover
(depending on model).
Turn the hex wrench to the left (counter-
clockwise) to unlatch.
NOTE: On some models there may also be
screws to remove at the lower front
corners. See following photo.
•
Lift the rear end of the cover upward and slide
rearward, then pull the cover from the
opening.
Latch Handle Locations
-Typical View
Squeeze latch handles toward hood
panel and raise hood into open position
• Insert hex wrench into the hole on the top
center of the engine cover (as shown) or
the front edge of engine cover to unlatch
-Typical View
• Remove screws on both sides of engine cover
-Typical View
-Typical View
