Audio-Video System
Basic Operation
Guide
Part No. 161501-08-002
0802070625 June 2007
Copyright 2007 Winnebago Industries, Inc.
All rights reserved.
NOTE: See your InfoCase for specific
operating guides for audio and
video components.
•
Turn on the 12-Volt
master power (TV)
switch, located on the
video cabinet near the
TV.
NOTE: When the TV is
not in use, the TV
master power switch should be
turned off to avoid drain on the 12-
Volt house battery.
Set TV Sound Output
•
Use the TV Menu button to set TV
audio output to
Variable Audio
Output
. (See TV owner’s manual for
instructions.) This will connect TV
stereo sound output to the deluxe
speakers in the lounge area.
•
Volume is adjusted with the TV
remote or volume buttons.
Set TV Video Input
•
Turn TV and DVD player On
•
Press the
MODE
button on the front
of TV or
SOURCE
button on the TV
remote and select “
AV 1
” input.
•
The TV
screen will
display the
DVD
player
logo when
the correct input is selected.
Play DVD
•
Insert DVD into player. DVD will
begin to ‘load’ automatically. TV
screen will typically show
“
READING
” or “
LOADING
.”
•
The DVD may load directly
to the main title/menu
screen or it may begin to
play previews. You may be
able to skip previews if
desired by pressing the
‘
NEXT
’ button until you see the
main menu screen.
•
When the
main menu
screen
appears, use
the arrow
buttons on the
DVD remote
to select the
desired entry
or press the
ENTER
or
PLAY
buttons on the
remote (or ‘
Play
’ button on DVD
player) to begin playing the feature.
•
Volume is adjusted with the DVD
remote (or volume buttons on DVD
player).