![background image](http://html1.mh-extra.com/html/winnebago/itasca-ellipse/itasca-ellipse_owners-manual_987494077.webp)
4-23
SECTION 4 –
APPLIANCES AND SYSTEMS
Beneath Floor Panel in Wardrobe
-Models 40BD and 40WD
•
Remove floor panel from wardrobe as shown
in the following photo to access filter.
Filter must be installed with airflow markings
(arrows) pointing downward.
NOTE: Do not block the filter in any way, such
as by setting packages or newspapers,
etc. in front of the return air grate. There
must be free airflow for the air
conditioner to operate efficiently.
Inside Return Air Vents
-Model 42AD
Air conditioner filters are located inside the
Return Air Vents throughout the ceiling of the
coach and must be inspected monthly and
cleaned periodically so the air conditioners will
operate efficiently.
Supply airflow comes from the vents located
on the driver side of the coach. Return Air Vents
are located on the passenger side of the coach. It
is the Return Air Vents in which the cleanable air
filters are installed.
It is recommended to use mild soap and warm
water to clean the air filters. When finished,
allow air filters to air dry.
NOTE: There are multiple Supply and Return
Vents throughout the coach. Therefore,
you must remember to remove each
separate air filter from each Return Air
Vent to clean.
A/C Filter Access
*MODEL 40CD
(Located beneath rear lavatory cabinet)
-Typical View
Filter Size: 14” x 20” x 1”
A/C
Filter
Access Panel
(Removed)
Lavatory
Cabinet
AC/Furnace Filter Access
*MODELS 40BD and 40WD
(Located under wardrobe floor panel)
-Typical View
Filter Size: 14” x 20” x 1”
Supply/Return Air Vents
*MODEL 42AD
(Located throughout the ceiling of the coach)
-Typical View
• Unlatch clips located on the sides of the Return
Air Vents and remove.
• Remove air filter to clean.
Supply
Air Vent
Return Air Vent
(Remove Return Vent
cover to access filter)