3-31
SECTION 3 –
DRIVING YOUR MOTORHOME
To Retract Power Generator Tray
•
Open the Generator Tray Power Switch
Cover.
•
Press and hold the Generator Tray Power
Switch in the RETRACT position until
generator tray is in the fully CLOSED
position.
NOTE: The generator tray will come to a stop
and you will hear an audible “clicking”
sound when it is fully retracted.
•
Close the Generator Tray Power Switch
Cover.
NOTE: When the switch cover is closed after the
generator tray is fully retracted, the
generator tray will engage into locked
position.
Further Information
Refer to the manufacturer’s instruction
manual provided in your InfoCase for further
information, including manual retraction
instructions.
WINDSHIELD WASHERS AND
WIPERS
The Windshield Washer Fluid Reservoir is
located behind the front hood panel (see “Front
Service Access” elsewhere in this section for
instructions on opening the hood panel).
We recommend using commercially available
premixed solutions for best results. Avoid using
water in freezing temperatures, as the washer
pump could become damaged.
TIRES
Improper tire pressure can result in tire
overloading and abnormal wear and also affects
handling, ride characteristics, and fuel economy.
HUB COVER
Freightliner
®
Chassis supplied with Alloy
Wheels
•
To remove the rear hub cover, locate the hub
cover wrench (with directional indicator
arrows) from the InfoCase.
WARNING
Make sure all replacement tires are of the
same size and rating as those shown on
your Vehicle Certification Label.
Windshield Washer Reservoir
(Located behind front hood panel)
-Typical installation shown
Hub Cover Wrench
-Typical View
