
SECTION 8 –
ENTERTAINMENT
8-4
TV Sound Through Home Theater
Speakers
When watching TV programs alone, the TV
normally plays sound through its own built-in
stereo speakers. If you wish to connect TV stereo
sound output to the home theater speakers for a
richer sound quality, follow these steps:
•
Turn TV and DVD player ON.
•
Press FUNCTION button on DVD player or
remote to set DVD player to TV CABLE.
•
Use TV Menu button to set TV audio output to
“Variable Audio Output”. This routes TV
stereo sound output through home theater
system.
> Audio (turn speaker Off)
> Setup (change to Variable)
•
Select TV channels and adjust volume with
remote for either the TV or DVD.
NOTE: Turn the volume level up significantly on
the DVD player when using the home
theater as an amp for the TV through the
stereo system.
DVD PLAYER - FRONT BUNK
SWING-OUT TV
(Without Home Theater)
–If Equipped
The DVD player is connected to the TV and
plays through the TV stereo speakers or the
deluxe sound rear radio speakers in the lounge
area of the coach.
Provide 12V Power
The TV and DVD player operate on 12-volt
DC current.
•
Turn on the 12-volt master power
(TV) switch (located on the video
cabinet near the TV).
NOTE: When the TV is not in use,
the TV master power switch should
be turned off to avoid drain on the
12-volt house battery.
Set TV Sound Output
•
Use the TV Menu button to set TV audio
output to
Variable Audio Output
. (See TV
owner’s manual for instructions.) This will
connect TV stereo sound output to the deluxe
speakers in the lounge area.
•
Volume is adjusted with the TV remote or
volume buttons.
Set TV Video Input
•
Turn TV and DVD player ON.
•
Press the SOURCE or INPUT button on the
TV or TV remote to select “INPUT 1” or
“AV1”.
•
The TV screen will display
the DVD player logo when
the correct input is selected.
Play DVD
•
Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show “READING” or “LOADING”.
•
The DVD may load directly to the main title/
menu screen or it may begin to play previews.
You may be able to skip previews if desired by
pressing the NEXT button until you see the
main menu screen.
•
When the main menu screen appears, use the
arrow buttons on the DVD remote to select the
desired entry or press the ENTER or PLAY
buttons on the remote (or “Play” button on
DVD player) to begin playing the feature.
MENU
ENTER
NEXT