SECTION 3 –
DRIVING YOUR MOTOR HOME
3-6
Reprogramming Remote
When replacing batteries, the remote unit may
need to be reprogrammed with a switch on the
keyless entry system control box.
The entry system control box is located
behind the circuit breaker mounting panel in the
12-volt electrical compartment at the front left
side of the coach.
To access the keyless entry control box,
remove four screws and open the panel carefully
to avoid damage or disconnection of wiring
looms.
The programming switch is protected by a
sealing label as indicated on the box.
Further Information
Please read the Keyless Entry System
information in your InfoCase for complete
operating information as well as a full description
of all of the system’s features and programming
instructions.
MIRRORS – POWER ELECTRIC
Always adjust mirrors for maximum rear
visibility before driving. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
Mirror Adjustment Control
The mirror control is located on the driver side
armrest panel or the dash. The ignition key must
be on to adjust the mirrors.
Mirror Heaters
The mirrors may also contain heating
elements to defog or de-ice the mirror glass
during cold weather operation. An ON-OFF
switch for the mirror heaters is located near the
remote mirror controls.
Keyless Entry Control Box in
12-volt electrical compartment.
Move Selector Switch L or R to select mirror.
Center “neutral” position disables arrows
to avoid unintentionally moving a mirror
Press Arrow Buttons to move
mirror surface in direction indicated