9-3
SECTION 9
FURNITURE & SOFTGOODS
9 FURNITURE & SOFTGOODS
U-SHAPED DINETTE/BED
CONVERSION
- Optional (Model 327L only)
The round dinette can be converted into
additional sleeping space when needed by
lowering the table and moving a cushion into
place as shown below.
1. Lift the table upward off the support tubes and
set the table edgewise onto the floor.
2. Remove the table leg tubes.
3. Store table leg tubes in compartment beneath
dinette seat.
4. Be sure leaf extension is lowered.
5. Place the table, ‘flat’ side outward, in the
‘notch’ - lowering it onto the table support
columns on the dinette seat face.
6. Place large, rounded back cushion into place
over the table to complete the bed cushion
conversion.
Reverse steps to reassemble to dinette
configuration.
Round Table Leaf Extension
Lift the leaf extension upward then reach
beneath the tabletop and slide the support arms
outward to hold the extension. Reverse steps to
lower the extension.
DAY/NIGHTER PLEATED
BLINDS
Your coach may feature two-stage pleated
window blinds that can be used for daytime or
nighttime privacy.
Sun Shade
The lower section is a translucent white shade
that can be lowered for privacy without
darkening the inside of the coach. It can also filter
out harsh direct sunlight to help keep the inside of
the coach cool in summer or to disperse light for
houseplants.