elddis Crusader Owner'S Handbook Manual Download

Page: 1 / 122

Issue 4

The Explorer Group Limited

Delves Lane, Consett, Co. Durham DH8 7PE

Telephone: 01207 699000 • Facsimile: 01207 699001

• www.explorer-group.co.uk

All the illustrations and descriptive matter in this guide are intended to give a general idea of the

caravan. Changing market and supply situations may prevent the manufacturer from maintaining

the exact specifications and details in this handbook and we therefore reserve the right to alter

specifications and materials as conditions demand.

Retailers are independent of the manufacturer and have absolutely no authority to bind the

manufacturer by any express or implied undertaking or representation.

Model Year 2012

OWNERS
HANDBOOK

Touring Caravan

Summary of Contents for Crusader



























































































































Search results

Summary of Contents for Crusader

Reviews:

Related manuals for Crusader

Brands by name

Popular brands

elddis Crusader, Owner'S Handbook Manual

Search results

Summary of Contents for Crusader

Reviews:

Related manuals for Crusader

Brands by name

Popular brands