![background image](http://html1.mh-extra.com/html/winnebago/2004-itasca-sunstar/2004-itasca-sunstar_owners-manual_987436095.webp)
SECTION 9
CARE & MAINTENANCE
9-1
ROOF
The roof is made of Thermo-Panel materials
like the walls and floor. It will support the weight
of an average adult should it become necessary to
repair the roof or roof mounted components. It is
not recommended, however, that very large or
heavy objects be carried on the roof while the ve-
hicle is in motion. (See Section 4 for roof loading
specifications.) Always have damage to the roof
area repaired immediately. Damaged or detached
sealant around the vents, air conditioner, body-
to-roof seams, etc., should also receive immedi-
ate attention. Delaying these repairs may allow
water leakage and result in damage to interior
ceiling and body panels, upholstery, etc.
UNDERBODY
Buildup of mud and dirt under the body can
cause damaging rust on steel parts and can add
needless weight to the vehicle. This, in effect, re-
duces the amount of cargo you can carry and re-
main with GVWR and GAWR limits.
Corrosive materials, such as those used for ice
and snow removal and dust control, also accumu-
late on the underside of a vehicle. These materi-
als should be removed by flushing the underbody
regularly with water, especially areas where mud
and other foreign materials collect.
EXTERIOR
The exterior surface of your motor home has
an automotive finish. Frequent washing and thor-
ough cleaning is recommended to prevent dam-
age to the vehicle finish after exposure to
damaging salts, calcium chloride, road tar, tree
sap, insects and other foreign material. Never
wash the vehicle in direct sunlight, while the ve-
hicle surface is hot, or using hot water.
Do not use strong soaps or detergents for
washing the motor home. Always use a mild soap
in warm water, a commercially prepared product
for cleaning automotive finishes or your local car
wash. Be careful when using pressure-type wash-
ers to avoid loosening exterior decals or sealants,
etc.
NOTE: Avoid aiming water flow from a hose or
spray from high pressure washing equip-
ment into any appliance intake or ex-
haust vents, which could cause damage
or difficulty in operating appliances.
After washing the motor home, carefully in-
spect sealing materials around window frames
and vents and any other joints that may have sep-
arated. Resealing, if necessary, is quite simple.
Appropriate compounds are sold at Winnebago
and Itasca dealers, and the materials are quickly
and easily applied. Also, inspect weather seals
around door, etc., and if necessary have a dealer
replace them immediately.
Waxing and Polishing
When water will not bead up and roll off the
finish of your freshly washed vehicle, it’s time to
apply a new coat of wax to the finish. Wax not
only improves the appearance of the vehicle, but
protects the finish against oxidation and corro-
sive substances.
We recommend using a wax that is compatible
with painted and gel-coated fiberglass finishes.
If the finish begins to look dull or discolored,
it may need to be cleaned with a polishing or
cleaning compound.
NOTE: If you use a polish or a cleaning com-
pound that does not contain a wax pre-
servative, we recommend reapplying a
coat of wax after cleaning or polishing
the finish.
Sealants must be inspected every 6
months and resealed if necessary.
CAUTION
Never use a strong solvent such as
lacquer thinner, or harsh abrasives on
painted surfaces.
CAUTION
Содержание 2004 Itasca Sunstar
