Winncare PITCHOUNE KALIN, Руководство пользователя

Страница: 4 / 36

4
It is strictly forbidden to stack packages weighing over 60kg/m², whatever
position they are in.
Before transporting or dismantling the bed, make sure the back and leg rests
are fixed to the frame of the bed base.
Dear Sir/Madam,
You have acquired a WINNCARE medical bed equipped with its accessories, and we thank you for your
custom.
This class 1 medical device complies with Regulation (EU) 2017/745 relating to medical devices
They are tested in conformity with standard IEC 60601-2-52 (2010) and IEC 50637 (2017) in their
commercial configurations, including the boards and accessories that we manufacture, so as to ensure you
maximum safety and performance.
As a result, maintenanc
e of the contracted good’s warranty depends on compliance with the conditions for
use recommended by WINNCARE and the use of original accessories, which also guarantees you safe use
of the medical bed and its accessories.
1. TRANSPORT AND STORAGE
For transport, the bed should be in its low position, and strapped and protected. The wired control and supply
lead should be attached to the bed base.
The head and footboards are protected and strapped to the sleeping surface.
The bed should be transported upright when in its original packaging in compliance with the instructions printed
on the packaging.
2. BED ENVIRONMENT CONDITIONS
The bed, along with the boards and accessories, must be transported and stored
at a room temperature of between -10°C and +50°C,
The bed, along with the boards and accessories, must used at a room
temperature of b10°C and +38°C,
Relative humidity of between 30% and 75%.
Atmospheric pressure between 700hPa and 1060hPa
3. GENERAL USE
Before use, it is essential to read these instructions carefully. They contain advice on using and looking after
the bed to guarantee optimum safety.
The latest updated version of this manual is available on our website
www.winncare.fr .
The photos, images and diagrams included in this manual may not correspond to your product depending on
the versions or options you have.
3.1. Prerequisites before use and instructions for use
3.1.1. Training and qualifications of the person using the device
Users must be trained by people who have been trained and approved by the relevant business entities, in
particular when it comes to safety and reporting non-conformities.
Observe the specified
environmental conditions