ENGLISH
RHINO
8
After Use
•
To deflate once the device is no longer in use,
open all valves on sections 1-4 by pushing in
valve and twisting clockwise to the DEFLATE
position. (fig.13)
Note:
While the Rhino is deflating, the
user may start to roll up the Rhino to assist
deflation, however this is not necessary as the
product will deflate unassisted.
•
To pack away, fold up the Rhino beginning with
the head-end of the product. Ensure valves are
turned to the INFLATE position and caps are
replaced after use.
Routine Cleaning
Note:
Always wipe clean any dirt or spills as soon
as they occur.
To clean, fully inflate all sections of the Rhino,
sponge clean with a non abrasive proprietary liquid
cleaner or disinfectant. Clinell Universal wipes or
similar can be used. Dry thoroughly.
Do not dry
using hot air.
Disinfecting
The Rhino should be fully inflated and pre-cleaned
by washing with detergent and water, thoroughly
rinsed and then disinfected using a 1:10 solution
of household liquid bleach and water (1 part
bleach to 10 parts cold water). Leave the solution
on the Rhino for approximately 10 minutes before
thoroughly rinsing off with clean cold water. Allow
to air dry before storage.
Do not dry using hot air.
Maintenance
Other than routine cleaning, the Rhino is
maintenance free.
Winncare recommends that your Rhino is
inspected annually by either your supplier or other
suitably qualified person.
If required, Winncare can provide the above
inspection within an annual service contract
(UK only). Please contact our Customer Service
Department for further details on Freephone 0800
2800 485.
14
13