ENGLISH
QUICK START GUIDE
2
This Quick Start Guide is not intended to replace the full user instructions. Please read
the full user instructions before using the Airflo 12.
WARNING:
THE AIRFLO MUST BE PUT ON CHARGE FOR 16 HOURS BEFORE FIRST USE.
To calibrate the battery and battery indicator, it is essential before the first
use to charge for 16 hours and then disconnect from the charger and leave
for 90 minutes to allow the battery management software to correctly
calibrate. Failure to do this could lead to incorrect battery charging and
battery ladder indication.
Fit the appropriate mains
adaptor to the charger (see
“Battery Charging” page 6).
Connect the battery charger
to a mains power socket and
the Airflo 12 charging
socket.
1
Before Use
CHARGE THE BATTERY FOR
16 HOURS
BEFORE
USE.
To calibrate the battery and battery indicator,
it is essential before the first use to charge for
16 hours and then disconnect from the charger
and leave for 90 minutes to allow the battery
management software to correctly calibrate.
2
First 6
Hours
16 Hours
Fully
Charged
For the first 6 hours, the bottom light will
flash green. After 6 hours the first light will
become a steady green and the second light
will start flashing. Charging cycle continues
until lights are lit. Then after 16 hours the
charge is complete with the top light flashing
and other 3 will be off.
Once a red LED and Deflate Lock has been activated during discharge (see page 3), a 2
hour plus charge is required to reset the Deflate Lock.
GREEN
GREEN
GREEN
GREEN
GREEN
GREEN
GREEN
GREEN
