Winncare Luna Twin/400, Руководство пользователя

Страница: 9 / 20

9
Pictograms and functions
Active side foil
:
(1) ON – The LED lights green to indicate,
that the ceiling hoist is ready.
If not used for a while the hoist will go into
sleep-mode and the LED turns off. Activate
the hoist again by pressing down
(3) or the
up button (4) on the hand control.
(2) BATT. – Indicates the level of the battery.
(See section 2.4).
(3) + (4) Down/Up – With a constant hold on
one of the arrows on the primary hoist
(where the hand control is connected), the
hoist move in the desired direction. Then
both hoists run synchronously up/down.
Release the button to stop the movement.
(5) Connecting the hand control – The ceiling
hoist connected the hand control is the
primary hoist.
(6) Name plate – Inform about model,
service, serial number and symbols.
(7) Emergency lowering – ONLY used in
situations where it is necessary to lower a
patient safely in a lift failure. This button
must be held constantly to lower the device.
(See section 2.3)
(8) STOP – Press the emergency stop button
to stop the Luna immediately.
This function can be reset by pressing the
reset button on the hand control for 5
seconds.
(9) Interconnector plug – The cable from the
distance rod must be connected to both Luna
celling hoists otherwise the synchronised
mode does not work.
Inactive side foil :
(1) (2) (3) (4)
(5) (6) (7) (8)
(9)
(6)