
4
m 6m
Notice
:
Use 2 pieces AAA size1.5V batteries in the remote control.Remove the battery when not use for
long time,thus the lifespan of remote control can be extended.
Choose the same specification battery when replacing the battery inside,otherwise it may cause
remote control not work ,thereby affect the normal use of the heater.
Please contact service agent for further help if you need the function.
The remote control function may be out of work if there is a barrier between the remote control
and heater .
Replacing the batteries duly so as not to affect the normal use of heater and remote control.
Operation Instruction
For additional protection the installation of a residual current device (RCD) is advisable.
Remove all package material (including anti-vibration object of the lamp) and check the
appliance, supply cord and the plug for signs of damage.
Pay attention to the mounting place and all mounting material(dowels, screws). Ensure they
are suitable and stable enough for mounting and lastingly holding of the appliance.
Before mounting, the minimum safe mounting distances and tilt angles shown in the figures
must be strictly followed.
1.
The distance between the bottom edge of the appliance and the floor must be at least
1.8 M.
2.
There must be a distance of at least 0.2 M between the appliance and the ceilings, roofs
or other covers.
3.
There must be a distance of at least 0.5 M at each side between the appliance and walls
or the like. See figure 2.
4.
Remember that degree to mounting surface is 45°.
Pay attention that, the installation of the appliance must not add excessive wind load.
Fix the mounting bracket on the wall first. Ensure that the place to be installed is secure and
firm. Or connect the appliance to the stand.
The heaters are also widely used under parasol with the help of parasol brackets
Adjust the desired angle of radiation and fest screw all screws. Check regularly the screws’
connection. Mechanical bearing pressure and oscillation due to wind or rain could lead to loose.
Plug in the power source. Then observe, whether during the first 10-15 minutes the appliance
works trouble-free.
Remote
Control
Heater