Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep this
user manual for future reference.
•
Always disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.
•
For pluggable equipment, the power outlet must be installed near the equipment and
must be easily accessible.
•
Keep this equipment away from humidity.
•
Put this equipment on a reliable surface during installation. Dropping it or letting it fall
could cause damage.
•
The openings on the enclosure are for air convection and to protect the equipment
from overheating.
•
Before connecting the equipment to the power outlet make sure the voltage of the
power source is correct.
•
Position the power cord so that people cannot step on it. Do not place anything over
the power cord.
•
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
•
Never pour any liquid into an opening. This could cause fire or electrical shock.
•
Never open the equipment. For safety reasons, only qualified service personnel should
open the equipment.
•
All cautions and warnings on the equipment should be noted.
•
Always ground yourself to remove any static charge before touching the board.
Warning!
•
Any person who connects external equipment to signal input, signal
output, or other connectors has formed a system and is therefore
responsible for the system to comply with the standard IEC 60601-1,
safety requirements for medical electrical systems
•
Do not modify this equipment without authorization of the manufacturer.”
•
Do not place the Monitor to be difficult to operate the disconnection device
from power supply cord and to fully disengage the power to the unit,
please disconnect the power cord from the AC inlet.
Avertissement!
•
Toutepersonne qui connecte un équipementexterne à l'entrée de signal, à
la sortie de signal ou à d'autresconnecteurs a formé un système et
estdoncresponsable de la conformité du système à la norme CEI 60601-1,
exigences de sécurité pour les systèmesélectromédicaux
•
Ne modifiez pas cetéquipement sans l'autorisation du fabricant. »
•
• Ne placez pas le moniteurdans des conditions difficiles à utiliser le
dispositif de déconnexion du cordon d'alimentationet pour
coupercomplètementl'alimentation de l'unité, veuillezdébrancher le cordon
d'alimentation de la prisesecteur.
