USER MANUAL
CHAPTER 2
GETTING STARTED
2
G-WIN SLIM IP65 PANEL PC (P-CAP)
CHAPTER 2: GETTING STARTED
This chapter provides information on how to connect the HMI device to the source of
power, connector pinouts and the guideline to turn on/off the HMI device.
2.1 Turning On and Off
2.1.1 Turning on Your Device
1.
Remove the protective cap of the power connector.
2.
Connect power cable to the connector of your device. Make sure the cable fits to the
connector, then tighten the O-ring (by turning clockwise) to secure the connection.
3.
The device will boot automatically when powered on.
