Winmate ID70, Руководство пользователя

Страница: 19 / 87

ID70 Motherboard User Manual 11
2.4 Jumper Setting
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes. Generally, you
simply need a standard cable to make most connections.
The jumper setting diagram is as below. If a jumper shorts pin 1 and pin 2, the setting
diagram is shown as the right one.
The following tables list the function of each of the board's jumpers.
Label Function Note
JP1 RS232 / RS422 / RS485 Selector 3x4 header , pitch 2.0mm
JP2 RS232 / RS422 / RS485 Selector 2x3 header , pitch 2.0mm
JP3 LVDS PWR Selector 2x3 header , pitch 2.5mm
JP4 Back Light PWR 3x1 header , pitch 2.5mm
JP5 Clear CMOS 3x1 header , pitch 2.5mm
JP6 PWM Level 3x1 header , pitch 2.0mm
JP7 PWM/DA 3x1 header , pitch 2.0mm
JP8 VR/Software 3x1 header , pitch 2.0mm
2.4.1 JP1: RS232 / RS422 / RS485 Selector for CON port
2.4.2 JP2 : RS232 / RS422 / RS485 Selector for CON port
1
2
3