Winmate I370, Руководство пользователя

Страница: 56 / 73

I370 Motherboard User Manual
47
First/ Second/ Third Boot Device
These fields determine the drive that the system sear ches first for an operating
system. The option available include Floppy, LS120, Hard Disk, CDROM,
ZIP100, USB-Floppy, USB-ZIP, USB-CDROM, LAN and Disable.
Boot Other Device
These fields allow the system to search for an OS from other devices other
than the ones selected in the First/Second/Third Boot Device.
Boot Up NumLock Status
This allows you to activate the NumLock function after you power up the
system.
Gate A20 Option
This field allows you to select how Gate A20 is worked. Gate A20 is a device
used to address memory above 1 MB.
Typematic Rate Setting
When disabled, continually holding down a key on your keyboard will generate
only one instance. When enabled, you can set the two typematic controls listed
next. By default, this field is set to Dis abled.
Typematic Rate (Chars/Sec)
When the typematic rate is enabled, the system registers repeated keystrokes
speeds. Settings are from 6 to 30 characters per second.
Typematic Delay (Msec)
When the typematic rate is enabled, this item allows you t o set the time interval
for displaying the first and second characters. By default, this item is set to
250msec.
Security Option
This field allows you to limit access to the System and Setup. The default value
is Setup. When you select System, the system prompts for the User Password
every time you boot up. When you select Setup, the system always boots up
and prompts for the Supervisor Password only when the Setup utility is called
up.
APIC Mode
APIC stands for Advanced Programmable Interrupt Controller. The default
setting is Enabled.
MPS Version Control for OS
This option is specifies the MPS (Multiprocessor Specification) version for your
operating system. MPS version 1.4 added extended configuration tables to
improve support for multiple PCI bus conf igurations and improve future
expandability. The default setting is 1.4.