Winmate I330EAC-IKW, Руководство пользователя

Страница: 18 / 76

18
I330EAC-IKW Embedded Computer User Manual
Chapter 4: INSYDE H20 BIOS Setup
This chapter describes the different settings available in the INSYDE BIOS that comes with the
board. This chapter offers information on the BIOS installation utility.
4.1 How and When to Use BIOS Setup
To enter the BIOS setup, you need to connect an external USB keyboard, external monitor and
press Del key when the prompt appears on the screen during start up. The prompt screen shows
only few seconds so need press Del key quickly.
Important:
Updated BIOS version may be published after the manual
released. Check the latest version of BIOS on the website.
You may need to run BIOS setup utility for reasons listed below:
1. Error message on screen indicates to check BIOS setup
2. Restoring the factory default settings.
3. Modifying the specific hardware specifications
4. Necessity to optimize specifications
BIOS Navigation Keys
The following keys are enabled during POST:
Key Function
Del Enters the BIOS setup menu.
F7 Display the boot menu. Lists all bootable devices that are
connected to the system. With cursor ↑and cursor ↓and by
pressing <ENTER>, select the device used for the boot.
Pause Pressing the [Pause] key stops the POST. Press any other key to
resume the POST.
The following Keys can be used after entering the BIOS Setup.
Key Function
F1 Help
F5/ F6 Change Values
F9 Setup Defaults
F10 Save & Exit
Esc Exit
Enter Select SubMenu
↑/ ↓
Select Item
← / →
Select Item
Note:
You can press the F1, F2, F3, F4,
–/+, and Esc keys by connecting
a USB keyboard to your computer.
For items marked ► press
<Enter> for more options.