21
Chapter 2: Installation
2.2.7 Connector 2 for Push Button Extension
Push Button Extension Cable for Connector 2
2.3 Cleaning the Monitor
Note:
T
he IP65 Stainless Panel PC withstands regular intense cleaning
and could hold up against steam and high-pressure water. The devices are
able to sustain water temperatures up to 80°C and a water jets.
Before cleaning:
Make sure the device is turned off.
Disconnect the power cable from any AC outlet.
When cleaning:
Use water up to 80°C to clean the housing.
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
The display area is highly prone to scratching. Do not use ketene type material (ex.
Acetone), Ethyl alcohol, toluene, ethyl acid or Methyl chloride to clear the panel. It may
permanently damage the panel and void the warranty.
If it is still not clean enough, apply a small amount of non-ammonia, non-alcohol based
glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
Don not use oil directly on the display screen. If droplets are allowed to drop on the
screen, permanent staining or discoloration may occur.
