English
ZERO+ WiFi
INITIAL OPERATION
ŵ
Insert the unit plug into an electrical outlet.
ˍ
The Control Panel lights will turn on and
off.
Ŷ
Press the ‘Power’ button.
Note
ˍ
During the first 4 minutes of power up, the Air Quality light
will flash as the Smart Sensors measure the air quality in the
environment, after which normal operation will begin.
ŷ
By default, when the unit first powers on, the
mode will be set to Auto with PlasmaWave
h
enabled.
ˍ
When in Auto Mode the fan speed will
be automatically adjusted according to
the environments air quality.
ˍ
PlasmaWave
h
works to remove harmful
airborne contaminants.
Note
ˍ
In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
ˍ
When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave
h
, it is normal and does not signify product
failure. To disable PlasmaWave
h
, see page 11.
