9
10
PRODUCT INSTALLATION
PRODUCT OPERATION
Do not install the unit under direct sunlight.
Long Exposure to direct sunlight can cause defects.
Air Washer must be installed and operated on an even surface.
Vibrations and noise can occur on soft or non-flat surfaces.
Products must be installed approximately 4 inches away from the wall and
15 inches from other electronic appliances.
Before operating the air washer, remove any plastic bags and polyfoams from
outside and inside of the unit.
SPACE SELECTION & INSTALLATION
For better performance and longer product life, please select an adequate space to
install the unit.
Installation
Operation
❷
Fill the water tank with cool tap water
up to the indicator line on inside of the
water tank. For optimal performance do
not overfill.
❸
Replace the top section of the air cleaner.
Make sure that it is seated properly and
lines up correctly.
❶
Lift and remove top section of the
air washer to open.
Water Line
Cautions
▶
Make sure to unplug the power cord before filling the water tank.
▶
Hard water may cause operation defects. Please use filtered water if necessary.
▶
Use caution when moving air washer with a full water tank, as it will be heavy.
SETTING UP YOUR AIR WASHER
BEFORE TURNING ON
