User Manual of Network Speed Dome
73
Figure 6-43
Tampering Alarm
2.
Check
Enable Video Tampering
checkbox to enable the tampering detection.
3.
Set the tampering area. Refer to
Step
1
Set the Motion Detection Area
in Section
6.6.1 Configuring Motion Detection
.
4.
Click
to edit the arming schedule for tampering. The arming
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to
Step
2 Set the Arming Schedule for Motion Detection
in Section
6.6.1 Configuring Motion Detection
.
5.
Check the checkbox to select the linkage method taken for the tampering. Notify
surveillance center, send email and trigger alarm output are selectable. Please refer
to
Step
3
Set the Alarm Actions for Motion Detection
in Section
6.6.1 Configuring
Motion Detection
.
6.
Click
to save the settings.
6.6.3
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the speed domes.
Steps:
