SHEET
OF
DWG NO
PROPRIETARY
EXCEPT AS OTHERWISE AGREED TO IN WRITING. THE INFORMATION AND DESIGN
DISCLOSED HEREIN ARE THE PROPERTY OF WIN-HOLT EQUIPMENT CORP. AND
MUST NOT BE COPIED OR DISTRIBUTED OUTSIDE WIN-HOLT EQUIPMENT EXCEPT
TO AUTHORIZED PERSONS WITH A GENUINE NEED-TO-KNOW WHO BY THE USE
HEREOF ACKNOWLEDGE WIN-HOLT EQUIPMENT OWNERSHIP AND AGREE TO
MAINTAIN THIS INFORMATION AND DESIGN IN STRICT CONFIDENCE.
FINISH
DO NOT SCALE DRAWING
TOLERANCES ARE:
3 PLACE DECIMAL
.032
FRACTIONAL
1/16
ALL SURFACES TO BE
BREAK SHARP CORNERS
MATERIAL
ANGULAR
2
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
QA:
SCALE
CHK:
1/8/2018
SIZE
REV
WIN-HOLT EQUIPMENT CORP.
ENGINEERING
PHONE: (516) 222-0335 FAX: (516) 222-0371
TITLE
ITEM:
IBM #:
ER#:
CUSTOMER:
4
5
A
DWN:
SHT LENGTH:
SHT WIDTH:
LENGTH:
1056410 ALDK NHPL-1834-KD ASSEMBLY
INSTRUCTIONS
TOP
M6 FH SCREWS
M6 CAPS
M8 CAPS
M8 BH SCREWS
LOCK WASHERS
CASTERS
WASHERS
ORIENT AS SHOWN
ASSEMBLE TOP TO
SIDES WITH M6 SCREWS.
TIGHTEN AND APPLY
SCREW CAPS.
ORIENT AS SHOWN
ASSEMBLE CASTERS TO
BOTTOM WITH M8 SCREWS,
LOCK WASHER AND FLAT
WASHER. TIGHTEN AND APPLY
SCREW CAPS.
