manualshive.com logo in svg

WinGD X92-B, Руководство по эксплуатации, Страница: 202 / 460

Поделиться
Скачать
WinGD X92-B Скачать руководство пользователя страница 202

5.9.3

Oil mist detector

The oil mist detection system continuously monitors the concentration of oil mist in the crankcase,
in the supply unit drive and in the supply unit. If there is a high oil mist concentration, the oil mist
detector activates an alarm. Thus damage to the bearings can be quickly found and explosions in
the crankcase can be prevented.

The system includes the sensors (002, 

Figure 5-46

) and the control unit (003) on the engine.

Fig 5-46

 Oil mist detector (example)

004

003

001

002

Legend

001

Data cable

003

Control unit E15.1

002

Sensor

004

Column

Each sensor monitors the concentration of oil mist. Each sensor has a self-test function to make
sure that there are no internal faults.

X92-B

AA00-9314-00AAA-043A-A

Operation Manual

Oil mist detector

Winterthur Gas & Diesel Ltd.

- 202 -

Issue 002  2021-11

Содержание X92-B













































































































































































































































































































































































































































































Отзывы:

Нет отзывов