WinGD WARTSILA RT-flex58T-D, Руководство по обслуживанию, Страница: 406 / 498

Maintenance
8733 − 1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
4/ 4
F
G
H
016.739/08
016.739/08
016.739/08
4
x
DF
94870C 94870A
1. 2.
HD 94870B
⇒ Remove claw 5 (Fig. ’B’).
⇒ Fix HP pipe 4 e.g. in a vice.
⇒ Screw on counter nut 94870C until it reaches the
thread end of the HP pipe.
⇒ Turn screw-on sleeve 94870A up to the counter nut.
⇒ Lock the screw-on sleeve with the counter nut.
⇒ Clamp grinding tool 94870B in hand drill ’HD’.
⇒ Slide grinding tool into the screw-on sleeve
until it slightly touches the HP pipe.
⇒ Let the grinding tool rotate with a max. speed
of 1500 rpm and grind for 3 to 5 seconds.
⇒
Withdraw the grinding tool from the screw-on sleeve
and blow out both parts with pressurized air.
⇒ Verify the surface quality of sealing face ’DF’ and if
necessary repeat the regrinding process using a
fresh emery cloth ’EC’.
Remark: In case of big notches the tube has to be short-
ened in order to restitute a clearance of ’x’ = min. 0.5 mm
between the countersunk screw and the end face.
⇒ Remove counter nut and screw-on sleeve.
⇒
After grinding thoroughly clean the HP pipe.
2013
HP Pipe to Injection Valve: Removing, Fitting and Regrinding of Sealing Faces