Installation Procedure
WiN7200 Installation and Setup Guide
23
3.4.7
Connect the Win7200 Data Adapter
The Data Adapter is a combined data and power adapter that interfaces to the customer’s
Outdoor Unit wireless device and is used to power the WiN7200 and to distribute data.
The Data Adapter unit includes a single output RJ-45 connector (for connection to an IEEE802.3
compatible device) that provides bi-directional 10/100 Base-T data and power to the outdoor
equipment over a Cat5e cable.
The unit receives power from 100V to 240V AC using an IEC-320-C14 industry standard
connector.
Note
: The AC power supply cord should be 3 wires, 18 AWG minimum, with length less than 4.5
m, safety certified according to national rules.
To connect the Win7200 Data Adapter
1. Interconnect the Win7200 Pico BST
DC/Ethernet
port and the Data Adapter
ODU IF
port,
using a Cat5e cable (not supplied).
Note: The indoor to outdoor CAT5 cable max length should not exceed 100m.
Refer to the following table for the ODU I/F connector pin out.
Table 2. ODU I/F port pin-out
Pin No.
Description
1
ETH Data
2
ETH Data
3
ETH Data
4
+55V
5
+55V
6
ETH Data
7
RTN (-)
8
RTN (-)
Refer to the following figure for the Ethernet cable pin out.
Note: The Cat5e Ethernet cable is not included. Please refer to Appendix B – IDU to ODU
Cable Specifications for detailed technical specifications.
