USER
MANUAL
WINE
IN25
Page 15
Fit the PVC drain and power cable on the brack-
et with the sticker clip delivered with the unit.
→
The flow must be vertical without loop.
Important :
After transport or maintenance, wait for 24 hours before switching
on the air conditioner.
3.
USING THE WINE CONDITIONING UNIT WINEMASTER
®
The thermostat indicates the temperature in the wine cellar with a precision of 2°C. A temperature change
of the air doesn’t mean the same change of temperature of the liquid due to the thermal capacity of the
liquid. The temperature is set at 12°C in the factory. During installation the set temperature must be
controlled and adjusted as shown in next paragraph if necessary.
3.1.
Connecting the air conditioner WINE IN25
When you plug the unit to the electrical socket, the display indicates the temperature of the
cellar:
-
If the cellar temperature
≥
to the thermostat setting : the fan starts up immediately
-
If the cellar temperature≤ to the thermostat
setting:
the fan doesn’t start.
Only the ventilator
works.
The power outlet must be accessible after installation
.
3.2.
Plugging in the wine conditioning unit WINE IN25
3.2.1.
Temperature setting of the air conditioner WINE IN25
The setting of the targeted temperature is made on the thermostat :
Sticker clip
