Winegard SK-3005, Руководство по эксплуатации, Страница: 5 / 8

MANUAL 101
MANUAL 110
MANUAL 119
MANUAL 129
MANUAL 148
MAIN MENU (returns to the User Menu)
EXIT (Enters the Search Routine)
Press [Select] to cycle through each of these satellites until the asterisk is next to the satellite you wish to find.
Then press [Enter].
The TRAV’LER Interface will ask you to confirm the change:
Press [Select] to move the asterisk to YES.
The Trav’ler Interface will acknowledge your selection and ask:
Pressing [Enter] or choosing YES, will stow the TRAV’LER and turn it off.
Pressing [Select] then [Enter] or choosing NO will start a new search for your chosen satellite.
EMERGENCY OFF:
The Winegard TRAV’LER antenna comes with an emergency Power Off feature.To activate it, press
and hold [POWER] and then press [SELECT] while still holding [POWER]. The TRAV’LER antenna will
stop where it is and turn off.
If the Emergency Power Off is used, the TRAV’LER antenna may not be in a safe position for
travel. DO NOT MOVE THE VEHICLE UNTIL YOU ARE ABLE TO STOW THE UNIT. See Ready to
Travel, top of page 4, Operation section.
Manual ###
*YES NO
POWER OFF
*YES NO
5
!
The TRAV’LER will remain in
manual mode until you select
multi-sat mode again.
To use the Manual Search Mode to select a specific satellite, choose Search Mode by pressing the [Enter] button.
Once in the Search Menu you may choose from:
MULTISAT MODE (The normal search mode)
MANUAL 61
MANUAL 72
MANUAL 82
MANUAL 91
OPERATION