Winegard RD-9946, Руководство по установке

Страница: 29 / 77

29
Model RD-9900
PINNACLE
POSITIONER
by WINEGARD
SELECT B
SELECT A
5. Press [ARROW BUTTONS] to enter correct elevation, Figure 14.
Figure 14
4. Press UP arrow button to
increase elevation by 1
o
increments
4. Press RIGHT arrow
button to increase elevation
by 5
o
increments
5. Press SELECT A
Model RD-9900
PINNACLE
POSITIONER
by WINEGARD
SELECT B
SELECT A
7. Press SELECT A if correct satellite was found
Press SELECT B if correct satellite was not found
El Angle = 45
4. Press LEFT arrow button to decrease
elevation by 5
o increments
4. Press DOWN arrow button to
decrease elevation by 1
o
increments
6. Press [SELECT A] Start Search , Figure 15. This will begin the search for
the satellite. If you selected the wrong elevation, press [SELECT B] Quit , this
will return you to step 3. Repeat 3 through 5 to select the correct elevation.
Model RD-9900
PINNACLE
POSITIONER
by WINEGARD
SELECT B
SELECT A
6. Press SELECT A
Start Search
Quit
Figure 15
7. Verify that system has found correct satellite (you will get a picture). Since
the DBS services use a digital signal and the satellites are only separated by
9
o
, the system can find the wrong satellite. Press [SELECT A] if correct
satellite was found, Figure 16. You are now ready to watch satellite TV! If the
wrong satellite was found, press
[SELECT B] to continue the search.
If no satellite was found, the message Satellite Not Found, Press Any
Button , will be displayed by the positioner. Press any button to return to the
menu shown in Figure 12, page 9.
Correct Satellite
Continue Search
Figure 16