NOTE: Unfolding elements procedure is the same for both
HD7698P
&
HD8200U antennas.
PARTS LIST
ASSEMBLY
STEP 1 - Contents of Package
A. Remove all parts from the box and compare to parts
list to ensure nothing is missing and to become
familiar with the part names.
See FIGURE 1
.
STEP 2 - Front Section
A. Stand front section up vertically and unfold all
elements (in any order) until they snap into place.
B. Remove bolt, hex nut, and director element from the
front section boom.
See FIGURE 2
.
C. Unfold the UHF directors.
See FIGURE 2.
D. Set front section aside being careful not to bend
the elements (laying it flat on the ground is the
best position).
Front Assembly
Rear Assembly
Mast Clamp
Mast Clamp
Boom Brace
Corner Reflector Assembly (2)
Flat Head Screwdriver
Phillips Screwdriver
Crescent Wrench or Pliers
Cartridge
Housing
Boot
TOOLS REQUIRED
(not included)
FIGURE 1
FIGURE 2
- Front Assembly
FIGURE 3
- Rear Assembly
UHF Director,
(Unfolded)
UHF Directors
UHF Directors
Director Element
Cartridge Housing
8 Up
6 Up
4 Up
&
Over,
Down
2 Up
&
Over,
Down
7 Down
5 Down
3 Down
1 Down
STEP 3 - Rear Section
A. Stand rear section up vertically with cartridge
housing up and facing away from you.
B. Alternately unfold elements per
FIGURE 3
in
direction of arrows until they lock into place in the
black plastic blocks.
C. Spin the rear section around so the cartridge
housing is now facing you. Unfold the remaining
elements in the same order.
See FIGURE 3
for
completely unfolded rear section.
